SET IPTV setup – Samsung · LG Smart TV (illustration)
SET IPTV setup on a Smart TV and Android TV
Illustration by Best Vision IPTV.
Short answer: the SET IPTV setup is done on a web page. The app shows a MAC address on the TV. On the “Set up” page of the app’s website you type that address, add the login or the M3U link from our email, and press “Send to my TV”. Then you restart the app.

SET IPTV is a simple player for Smart TVs and Android TV devices. You do not type a username on the TV with the remote. You send your playlist to the TV from a phone or a computer, and the TV is recognised by its MAC address. It is quick, and typing on a phone is easier than typing on a TV. This guide explains the SET IPTV setup from the first start of the app to the first channel.

What you need for the SET IPTV setup

  • A compatible device. According to the developer the app runs on compatible Smart TVs, on Android TV sets and boxes, and on Android tablets.
  • Your login from us. We email it after your order or free trial: a username, a password and a server URL (Xtream Codes), plus an M3U link.
  • A phone or computer with a browser.

Good to know: SET IPTV is made by an independent developer, not by us, and it contains no channels. At the time of writing the app has a free trial of 7 days, counted from the day you install it. After that the developer asks for a one-time activation fee per device. That fee goes to the developer and is separate from your subscription with us.

Step 1: install the app and find the MAC address

  1. Open the app store of your TV or Android device and search for “SET IPTV”.
  2. Install the app and open it.
  3. The start screen shows the MAC address of the device: six pairs of letters and numbers. Take a photo of it or write it down.

The app is not available in every store and for every TV model. If your store does not have it, send us the brand and model of your TV on WhatsApp. We tell you which player your TV can use; the login from us stays the same.

Step 2: the SET IPTV setup page

  1. On your phone or computer open the Set up page of the app: setsysteme.com/set.app. The page is called “Set up my playlists”.
  2. Type the MAC address from your TV. Capital or small letters are both accepted, with or without the colons.
  3. Choose Add a playlist and fill in the fields from the table below.
  4. Press Send to my TV. The page asks “Send the setup?”. Check the MAC address once more and press Confirm.
  5. When the page says “Done”, close the app on the TV and open it again. Your playlist is in the app menu.
FieldWhat you type
Playlist nameAny label, for example “Best Vision” or “Living room”.
Server addressThe server URL from our email. It starts with http:// and ends with the port number.
UsernameThe username from our email. Capital and small letters matter.
PasswordThe password from our email, with no space before or after.
M3U link (instead of the three fields above)The long link from our email. It contains get.php, your username and your password.
PIN codeLeave it empty. It is only needed if you protected the device with a PIN before.

Use either the Xtream Codes login (server address, username, password) or the M3U link, not both. We recommend the login: three short fields are harder to get wrong than one long link.

Start your free trial →

Changing or adding a playlist later

The Set up page can hold up to 9 playlists for one device.

  • To change something: type your MAC address and press Load current setup first. The page shows what is on the TV now, and you edit it from there.
  • To start again: the option “Remove playlists from the TV” deletes all playlists of that device.
  • After every change: restart the app on the TV. New playlists only appear at the next start.

After the first start

  • Give it a minute. The first time, the app has to load the whole list.
  • Use the groups. Open the group list to jump between countries and categories.
  • Connect a cable. A network cable to the router is the best fix for a stuttering picture.
  • Keep the MAC address. You need it again for every change.

Trial and activation of the app

During the 7 days you can test the app together with our free trial. After that the app must be activated by its developer. This is done on the “Activate” page of the same website with the MAC address shown on your TV. At the time of writing the developer charges a one-time payment of 170 MAD, about 15.50 euros, for one device. According to the developer the activation cannot be moved to another device and is not refunded. So activate only when your playlist plays well. We do not receive this fee.

Troubleshooting the SET IPTV setup

Message or problemWhat to do
“Invalid server address”The server address must look like http://server.com:8080, with http:// in front and the port at the end. Copy it from our email again.
“Invalid link: it must contain /get.php, username and password.”The M3U link was pasted incompletely. Copy the whole link from our email, or use the three login fields instead.
“Bot verification failed”Reload the page and try again.
Playlist does not show on the TVCheck the MAC address you typed, then restart the app. If it still fails, write to us and we check the login.
Picture stuttersUse a network cable or the 5 GHz Wi-Fi band, and restart the router.

Still stuck? Send us a photo of the TV screen on WhatsApp.

Setup guides for other apps and devices

Every app below works with the same login from us. Pick the one for your device:

A short overview of every device is on the How to use page, the full line-up is in the channels list, and the players are compared in the best IPTV player apps.

Frequently asked questions

Is SET IPTV free?

At the time of writing it has a free trial of 7 days. After that the developer asks for a one-time activation fee per device, paid on the app’s own website.

Where is the MAC address?

Open the app on the TV. The MAC address is shown on the start screen.

Xtream Codes or M3U link: which one should I use?

The Set up page accepts both. We recommend the Xtream Codes login: server address, username and password.

Does SET IPTV come with channels?

No. It is only a player. The channels come from your own subscription.

Can I use my subscription on a second TV?

Yes. Repeat the SET IPTV setup with the MAC address of the second TV. How many screens can play at the same time depends on your plan.

Can I test first?

Yes. Ask for a free trial and do the SET IPTV setup with the trial login.

One web page, one MAC address and one restart: that is the whole SET IPTV setup. Ask for a free trial and try it on your own TV first.

Start your free trial →